Our Solutions - DakotaDescription (composition of the system, the operation principle)Air source heat pump high temperature Dakota comprises of two elements linked together on site. The outside unit takes the heat of the outside air and sends it to the internal unit which transfers it to the network of heating through radiators, an underfloor heating or fan coil units. The system is previously charged with refrigerant R410A and R134a. It ensures the heating of the home environment as well as the production of domestic hot water. The range consists of three power levels: 11.5, 14.5 and 16.5 kW (operating between +7 °C and -20 °C outside). This system benefits from the most recent and successful technologies developed in the field. Two products in one: A medium temperature heat pump R410A Inverter DC which takes advantage of the best performance for the average outside temperature (between 0 °C and +5 °C, temperature adjusting according to the installation) in line with the seasonal COP. A booster R134a which raises the temperature of water release (up to +70 °C) and maintains a constant power of 100% thermodynamics without electric supplement for winter's coldest periods (up to -15 °C outside). Technology of the internal unit: successfully conceived and manufactured - Steadily tried and tested technology - High reliability - Selected and produced components systematically factory-tested. - Brazed plate heat exchanger, circulators and compressors of a recognized brand - Availability of components, easy maintenance - Optimal equipment level for maximum installation flexibility Technology of the outside unit: reliability and top of the range performance - High-performance Inverter DC compressor - Low sound level (strong vibratory enfeeblement) - COP among the best of the market (until 4.00) - Technology built on strong industrial and technological experience - Level of high electronic protection - Sound level and optimized air regulation (DC engine, studied railing) Several integrated functions - Operations management controller - Domestic Hot Water (ECS) management - External backup system in case of power failure or fluctuation for the boiler and pilot system - Auxiliary Piloting an auxiliary emergency heating generator - External signal electricity cost management (low\high rate periods) - Eco mode with daily or weekly program - Plombery frost protection mode - Anti-legionella operation - Automatic diagnosis - Anti short-circuit safety Several additional options available - External electrical heater 3 stages (relief): 2 kW / 4kW / 6 kW (CAPABLE) - Kit External electrical heater 3 stages (relief) to be taken up on mixing tank (KAE) - Mixing tank (BDM) - Domestic hot water kit (ECS) - Domestic hot water tank 300 liters (BESC300) - Kit 2 zones (K2Z) - Wall mounted support kit (KSM) - Ground mounted support kit (RUB) - Insulated refrigerant piping (LFR)3D ImageIndoor unit Dual outdoor unit Hot water tankApplications (existing home environment or replacement boiler)- Three power ranges / 4 models: Single-phase Dakota 11 Single-phase or three-phase Dakota 15 Three-phase Dakota 17 - Temperature of water release up to +70 °C to -15°C outside - Constant heat capacity for an outside temperature between +5 °C (adjustable according to the installation) and -15 °C: Dakota 11: 7.5kW Dakota 15: 11.5kW Dakota 17: 13.5kW - Product particularly adapted for use with a high-temperature network of radiators (+70 °C maximum) - Several functions and available options to cover most of the applications on the renovation market.BrochureDownload the brochure DAKOTADownload the technical brochure DAKOTA           PLAN DU SITE AIRPACTITRE : Our Solutions - DakotaDESCRIPTION : Our Solutions - Dakota LANGUE : 2 - en LANGUE PHP : 2 - en CONTENU : 4 - 3 - 0 HTML : dakota-html.php
CHOIX DE LA LANGUE |